SimScale simulation projects by baguilar | Page 1

baguilar's profile

uniform flow impacting a small raised plate

same thing, but now with 3d printed geometry

more wind tunnel stuff, this time with realistic inlet

hobby wind tunnel with flow straighteners

analysis of laminar flow through a 2 inch diameter tube.  the goal is to develop a small hobby wind tunnel.

laminar flow analysis for hobby mini wind tunnel project

CFD analysis of a 1 inch tube with a rod in the center.  Used to generate and analyze annular flow for a hobby wind tunnel project.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

baguilar's profile