Set up your own cloud-native simulation in minutes.Start Simulating Now
Stress analysis of a drone arm
2
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
2 Results
1 Geometry 1 Mesh 1 Simulation setup 2 ResultsAbout this project
I designed a new drone arm as part of the Simscale Drone Challenge. In this project I imported the arm, meshed it, and subjected it to a 2.25N lift load (not sure if the direction is correct...). I did not have any previous experience with Simscale and the study shows what I managed to in a couple of hours. There are a few other projects which could do with some analysis in the future, so I will be back for more!
