Set up your own cloud-native simulation in minutes.Start Simulating Now
149
0
1 Geometry
1 Mesh
1 Simulation setup
1 ResultTutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.
by simscalesimscale
1 Geometry 1 Mesh 1 Simulation setup 1 ResultTutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.
simscale created this project
about 8 years ago
arshad1000 copied this project
about 7 years ago
