SimScale simulation projects by arnold1 | Page 1

arnold1's profile

This is the first in a series where we want to find the best simulation type to demonstrate the heating of an internal residential space by convection from a combustion heater. The climatic conditions equate to a winter morning in Ballarat, Australia.

This project shows how to simulate the airflow inside an office space.

Examining a residential space with a radiating heater

Our first attempt didn't work with a .STL file, we'll try it with an IGES file.

The project illustrates how to simulate airflow around a complex F1 vehicle.

I'm copying this one to my own project with different geometry.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will complete a laminar pipe flow analysis

This is a class excersize here at Federaton University where we're trying to get any results at all for a thermal simulation.

Tutorial project for post-processing of Thermal Comfort Parameters Locally in ParaView.

Public Profile

arnold1's profile