SimScale simulation projects by anujkumarx117 | Page 1

anujkumarx117's profile

This validation case belongs to fluid dynamics. The aim of this validation case is to validate the conjugate heat transfer(CHT) v2.0 analysis implemented in SimScale.
The simulation results of SimScale were compared to the results presented in the study titled  Unshrouded Plate Fin Heat Sinks for Electronics Cooling: Validation of a Comprehensive Thermal Model and Cost Optimization in Semi-Active Configuration written by L. Ventola, G. Curcuruto, et. al. - Copy

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Here is a incompressible analysis for  a car spoiler

ADSA ASDJH ADSJJ AIDJ ASJJ LAKSD NASDK JASDLJ AJDL ASJDK

this is an aerodynamic simulation of a aircraft

ada af asda asfaasdada ada afsf asda a    d sf adf sdfs          df

AID SDH AS ADHI ADJKAD ADAKJF
AJDKADA AKSFJAB ASDAHDD AJSDA
ASDHK ASDHJ ASDHI  KAHDJ AIDHA

Public Profile

anujkumarx117's profile