Set up your own cloud-native simulation in minutes.Start Simulating Now
Flow of 200 bar of air going through a 2mm poplet shaft with a 6 mm throat then 90 sharp turn then another 90 sharp turn through a 7.62 pipe end of 5.50 mm
by simscalesimscale
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
andresdelriomo created this project
Flow of 200 bar of air going through a 2mm poplet shaft with a 6 mm throat then 90 sharp turn then another 90 sharp turn through a 7.62 pipe end of 5.50 mm