SimScale simulation projects by alamtania | Page 1

alamtania's profile

In this project vibration analysis of jet engine is performed.

The effect of numerics on the simulation quality and convergence time.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

Creating some meshes on a pipe junction and performing a convergence test on it

This project demonstrates the usage of rotating zones

Weight is one of the most critical parameters in aircraft design. In this exercise, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the yield stress and maximum allowable deflection

Public Profile

alamtania's profile