How Leaders are Escaping AI Pilot PurgatoryRegister here
Tutorial 2: Pipe junction flow
0
0
Statistics
4 Geometries
0 Meshes
0 Simulation setups
0 Results
4 Geometries 0 Meshes 0 Simulation setups 0 ResultsAbout this project
# MicroTrap Valve Fluid Dynamics & Filtration Device Specification ## Core Parameters - **Type:** Cylindrical water filtration device for microplastics removal - **Material:** Transparent polycarbonate - **Overall Dimensions:** 10 cm length × 3 cm diameter - **Main Flow Channel:** 1 cm diameter central channel traversing full length - **Target Contaminants:** Microplastics (0.1-5 microns) ## Critical Flow Features - **Microplastic Trap System:** 8-10 teardrop-shaped micro-loops (0.5-1 mm width) - **Loop Orientation:** 45° branching angle from main channel - **Flow Dynamics:** Engineered turbulence zones for microplastic separation - **Reynolds Number Range:** Design for typical household water pressure (40-80 PSI) ## Functional Components - **Cartridge System:** Removable internal assembly housing all micro-loops - **Maintenance Access:** Slide-out cartridge with twist-lock securing mechanism - **Backwash System:** 1 cm diameter flush port at midpoint for reverse flow cleaning - **Connection Points:** Universal threaded ends compatible with 1/2" and 1" standard pipes - **Pre-filtration:** Optional 5-micron mesh cap (5 cm diameter) for inlet protection ## Simulation Parameters - **Flow Rate:** Standard household flow (2-4 gallons per minute) - **Pressure Drop:** Minimize pressure loss while maintaining filtration efficiency - **Particle Tracking:** Focus on 0.1-5 micron particle behavior in turbulence zones - **Temperature Range:** 5-60°C operating conditions - **Efficiency Target:** >95% capture rate for target microplastic sizes ## Manufacturing Considerations - Design must be optimized for 3D printing production - Water-tight seals at all connection points - Removable components must maintain precise alignment with flow path - All internal surfaces accessible for cleaning
