Set up your own cloud-native simulation in minutes.Start Simulating Now
1 Geometry
1 Mesh
1 Simulation setup
1 Result*Simulation 7* Go to grab CAD and download the piston block of an ic engine. Apply the inner curved surfaces of the piston block a temperature of 500 C, and the inner wall of the piston head is subjected to a temperature of 2000 C. The outer surface of the piston block is applied with a convective heat transfer coefficient of 30 W/m2-K, and at a temperature of 27 C. Determine the total temperature distribution over the piston block if the material chosen is aluminium.
0
0
by slilbaekslilbaek
adityraj created this project
11 days ago
1 Geometry 1 Mesh 1 Simulation setup 1 Result*Simulation 7* Go to grab CAD and download the piston block of an ic engine. Apply the inner curved surfaces of the piston block a temperature of 500 C, and the inner wall of the piston head is subjected to a temperature of 2000 C. The outer surface of the piston block is applied with a convective heat transfer coefficient of 30 W/m2-K, and at a temperature of 27 C. Determine the total temperature distribution over the piston block if the material chosen is aluminium.
