Set up your own cloud-native simulation in minutes.Start Simulating Now
AIJ: Case E - LBM Validation - Copy - Copy
0
0
Statistics
1Â Geometry
1Â Mesh
1Â Simulation setup
5Â Results
1Â Geometry 1Â Mesh 1Â Simulation setup 5Â ResultsAbout this project
The purpose of this project is to use experimental results from the Architectural Institute of Japan to validate CFD results gained from SimScale. The case being validated is Case E, which consists a complex of buildings with simplified geometry. Many scenarios are presented in Case E, The scenarios used to validate the SimScale platform were the North, East, South and Westerly winds for the after construction scenario. The SimScale CFD results were compared to the experimental results and found to have good correlation. Some underprediction was seen in the k-epsilon models in the strong wind regions and underprediction in the wake regions, but is a known trait of the K-epsilon model and is acceptable and should be considered when evaluating results. - Copy - Copy
