SimScale simulation projects by aadil1815 | Page 1

aadil1815's profile

Conjugate Heat transfer Analysis on the manifold located upstream of the ramjet fuel injector is performed using SimScale CHT V2.0 Solver. The flow field of the hot fuel JP-7 flowing through the manifold is simulated and the wall temperature of the manifold is computed. This experiment essentially duplicates the conditions of a regeneratively fuel cooled hypersonic ramjet engine flow path of heat sink construction to simulate the actual conditions the engine would be operated at by using a facility fuel heater. In order to match these conditions correctly, a detailed thermal analysis on upstream fuel delivery components(manifold) is required.

CHT Simulation of a flow through pipe.  Gasoline is transported through pipes among other ways. In this simulation the low temperature gasoline is being transported through a pipe of higher temperature found generally at sunny areas outside city limits reaching up-to 55 deg. We simulate how the gasoline temperature varies under such conditions. The fluid property change under varied thermal loads can vary & hence its important to simulate it before we manufacture. Pipes are used throughout the world for transporting N number of products & hence even though appears basic, proper analysis is highly profitable in the longer run for the life of material & fluid product.

In this Project we Simulate an Exhaust Manifold using CHTV2.0 Simscale solver 

The goal is this project is to understand the Heat transfer between the exhaust gases and the manifold, Thermal stresses on it as well as heat transfer coefficient accuracy & predictions. We evaluate areas of higher velocity and temperature variation and perform more detailed analysis on it to find out what kind of condition to expect at the outlet of the exhaust, how to improve its performance and much more !

Conjugate heat transfer simulation in a U tube Heat exchanger using CHT 2.0 Solver of SimScale.

External aerodynamics around ahmed body model

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

aadil1815's profile