Set up your own cloud-native simulation in minutes.Start Simulating Now
Sterling Engine
0
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
1 Result
1 Geometry 1 Mesh 1 Simulation setup 1 ResultAbout this project
Determine the temperature distribution contour of the CAD model of a sterling engine whose high temperature exposure end is subjected to a heat flux of 5000 W/ m2. Where as the whole body is subjected to a convective film heat transfer coefficient of 10 W/m2-K at a temperature of 30 C; as it is opened to the natural flow of air.
