SimScale simulation projects by Tom_nerd | Page 1

Tom_nerd's profile

you know when the teacher complains at you for swinging on your chair because its bad for the chair. are they right(question mark) lets find out

this is a test that should reveal if audi's engineers have been doing there homework

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

I was wandering the other day what would happen if it pinned the blender monkeys ears to a wall then pulled on her chin . which bit will feel the most stress (question mark) all of your questions answered in this simulation.

does having cargo onboard a freighter slow it down in respect to air resistance(question mark) now you know.

to find out how good freighters are in respect to aerodynamics and to see if having cargo onboard will impact the air drag on the ship.

my plan for this simulation is to use a 3d model that I have already created of a fighter jet and run it through some aerodynamics simulations. hope you enjoy :-)

Public Profile

Tom_nerd's profile