SimScale simulation projects by TestBusterG | Page 1

TestBusterG's profile

Tester Wing Research NII
Second Test in a many hour research.

Tester Wing Research NI
First Test in a many hour research.

An aerodynamics study of the unique F-117 design in SimScale.

Tester Wing Research V5 NI
Seventh Test in a many hour research.

The effect of numerics on the simulation quality and convergence time.

In this project vibration analysis of jet engine is performed.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

This is a test to try to find the right settings.

FSAE Workshop SIV Formula Student Front Wing Design TBG Edition

External aerodynamics on the geometry of the 2016 Ford Shelby GT350R Mustang.

This project demonstrates the usage of rotating zones

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

Tester Nose Research V1 NI
Seventh Test in a many hour research.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Hope I fixed the geometry.
Still need to test settings.

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

Tester Tail
Fifthteenth Test in a many hour research.

Aerodynamic properties of an aircraft with different wing designs

Tester Wing Research V4 NI
Sixth Test in a many hour research.

Tester Wing Research NIII
Third Test in a many hour research.

Tester Wing Research V3 NI
Fifth Test in a many hour research.

Tester Nose V3RC Research V3 NII
Twth Test in a many hour research.

FSAE Workshop SIV Formula Student Front Wing Design RXR Retry.
I found the button that let me transform things. Finally.
Retry it again, geometry moved.

Tester Nose V2R Research V1 NII
Tenth Test in a many hour research.

Tester Nose V2 Research V1 NI
Ninth Test in a many hour research.

FSAE Workshop SIV Formula Student Front Wing Design RXR Retry.
I found the button that let me transform things. Finally.

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

Retry, because even after your help it still gave the error it will exceed  my core hours.

Tester Nose V3R Research V1 NIII
Eleventh Test in a many hour research.

Tester Wing Research V2 NI
Fourth Test in a many hour research.

Tester Nose V3RC Research V3 NIII
Thirteenth Test in a many hour research.

This is a test for the real project.
Just playing around with the settings.

FSAE Workshop SIV Formula Student Front Wing Design RXR Retry.
I found the button that let me transform things. Finally.
CAD Geometry Failed.
But already tested both separately and succeeded and it looked good.
Still Failed.

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

Try the new geometry.
Got tessellated surfaces on the other one

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

Public Profile

TestBusterG's profile