SimScale simulation projects by Steelduines | Page 1

Steelduines's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project contains resources for Session 1 of the F1 Workshop

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

In this project vibration analysis of jet engine is performed.

This project shows how to simulate a particle fluid flow through a cyclone separator.

This sample project shows how to simulate particle fluid flow through a cyclone separator.

This project shows the mixing and moving of granular particles through a screw conveyor.


Tutorial for In-compressible Turbulent flow through a cyclone seperator

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Drone_Workshop_Session_1_Public_Copy_to_Solve

Public Profile

Steelduines's profile