Set up your own cloud-native simulation in minutes.Start Simulating Now
Oldham's coupling - Copy - Copy
0
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
2 Results
1 Geometry 1 Mesh 1 Simulation setup 2 ResultsAbout this project
An Oldham's coupling of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases. Determine the von mises stress and displacement contours and state whether the Oldham's coupling joint should be used or not and in which case the stresses and displacements are lowest. - Copy - Copy
