SimScale simulation projects by SayanS | Page 1

SayanS's profile

Good Mesh Extended Wing Test (AOA 20,22,24,26,28)

Good Mesh Extended Wing Test (AOA 10,12,14,16,18)

Incompressible simulations performed at angles of attack of 24 and 32 degrees.

Simulation conditions:
- 15 m/s free stream velocity
- 101.325 kPa air pressire
- 0.10 m chord length
- 0.30 m span
- approximate Reynolds number of 105 000

Incompressible simulations performed at angles of attack of 0, 8, and 16 degrees.

Simulation conditions:
- 15 m/s free stream velocity
- 101.325 kPa air pressire
- 0.10 m chord length
- 0.30 m span
- approximate Reynolds number of 105 000

CFD simulation of a wing with two winglets at an angle of attack of 15 degrees. Completed for a high school science fair project.

cfd simulation of a NACA 0012 airfoil with span 0.1m and chord 0.1m

test model for lift and drag on an airfoil

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

SayanS's profile