Post-Processor Screenshot - PostProcessorScreenshot
Post-Processor Screenshot - PostProcessorScreenshot
PostProcessorScreenshot
2D
101 kPa 100 m/s - 4 sec 0.005steps - SimulationRun
SimulationRun
3D
101 kPa 100 m/s - Failed force reversed - SimulationRun
SimulationRun
3D
100 Pa 30ms - Run 1 - SimulationRun
SimulationRun
3D
1 kPa 30ms - Run 2 - SimulationRun
SimulationRun
3D
101kPa 30m/s Ali numerics - Run 1 - SimulationRun
SimulationRun
3D
Hyperloop_in_tube - Geometry
Geometry
3D
views 449
shares 6
RichMacf
Created

over 7 years ago

Last modified

over 6 years ago

Statistics
geometries 1 Geometry
meshes 3 Meshes
simulations 5 Simulation setups
runs 6 Results

About this project

To find the drag for a Hyperloop pod, 1.8m dia, in a 2.6m tube. With the 2:1 tube/pod area ratio, the airflow in the narrow throat is faster or more compressed. The vacuum, about 100Pa (1/1000 atm), will reduce the drag forces. Would like speeds up to 250 m/s, but it's challenging with maybe transonic flow in the throat.

Start the Conversation

Default avatar

Log in to comment.

Not yet a SimScale user? Sign up.

Hyperloop Pod in Tube by RichMacf | SimScale