Set up your own cloud-native simulation in minutes.Start Simulating Now
Iphone 6 with Case - Drop Test
301
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
0 Results
1 Geometry 1 Mesh 1 Simulation setup 0 ResultsAbout this project
The project goal is to simulate drop test of an iPhone 6 with case.In this project a dynamic type simulation will be conducted, simulating the drop of an iPhone 6 with case from a height of 20 cm which is then used for comparison with existing results from drop of an iPhone 6 without case.
