SimScale simulation projects by Nkemjika | Page 1

Nkemjika's profile

Exercise 1 of the Aircraft Design Workshop

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Design Optimization of an Aircraft Engine Bracket

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

Design Optimization of a Globe Valve: Exercise 2

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Nkemjika's profile