Set up your own cloud-native simulation in minutes.Start Simulating Now
7
0
1 Geometry
1 Mesh
1 Simulation setup
2 ResultsA knuckle joint of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases. Determine the von mises stress and displacement contours and state whether the knuckle joint should be used or not and in which case the stresses and displacements are lowest.
by simscalesimscale
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
Manojku2509 created this project
over 1 year ago
1 Geometry 1 Mesh 1 Simulation setup 2 ResultsA knuckle joint of aluminium alloy is subjected to a tensile, compressive and transverse load of 5000 N separately in three different cases. Determine the von mises stress and displacement contours and state whether the knuckle joint should be used or not and in which case the stresses and displacements are lowest.
