Set up your own cloud-native simulation in minutes.Start Simulating Now
strength project 2025
7
0
Statistics
0 Geometries
0 Meshes
1 Simulation setup
0 Results
0 Geometries 0 Meshes 1 Simulation setup 0 ResultsAbout this project
water tant stand that is 5m high that must support 10 000 liters of water. each member of the stand must not exceed 125MPa of yield strength. The material used must be steel with density of 7900kg/m^3. it is recommended that we design a 3D structure using less members but statically determined. calculate all the forces within the members and test for buckling and FEA Analysis is required
