Set up your own cloud-native simulation in minutes.Start Simulating Now
469
0
1 Geometry
1 Mesh
1 Simulation setup
4 ResultsCase 1 (Mod3a.stp)Apipe with a diameter of0.5 cmand the radius of curvature of0.5 cm. The straight portion of pipe before the bendis 2.6 cmand the straight portion after the bendis 4.6 cm. Air entering the pipe with a mean velocity of4.7 m/sand at a temperature 25 oC whilethe pipe exit pressure is 0 atm.Heating is provided with 119 W m2 on the surface of the entire length of the pipe.
by mwavinyamwavinya
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
Fritz created this project
over 6 years ago
1 Geometry 1 Mesh 1 Simulation setup 4 ResultsCase 1 (Mod3a.stp)Apipe with a diameter of0.5 cmand the radius of curvature of0.5 cm. The straight portion of pipe before the bendis 2.6 cmand the straight portion after the bendis 4.6 cm. Air entering the pipe with a mean velocity of4.7 m/sand at a temperature 25 oC whilethe pipe exit pressure is 0 atm.Heating is provided with 119 W m2 on the surface of the entire length of the pipe.
