SimScale simulation projects by Erik_Meeks | Page 1

Erik_Meeks's profile

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

CFD, Wind Tunnel, and Real World data correlation for Michigan Tech Formula SAE team to solidify understanding of aerodynamic tools to assist in FSAE design

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755
2. Tutorial part 2: https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-2/79155

FSAE-Workshop-S3- Yaw angle- Analysis-Simulation

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Public Profile

Erik_Meeks's profile