SimScale simulation projects by DobesJ | Page 1

DobesJ's profile

Tutorial project to simulate external Aerodynamics of a futuristic car model

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Simple heat exchanger for CHT simulation.

Boundary conditions setup testing case. Fixed velocity and pressure inlet and multiple open outlets.

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

This project contains resources for Session 1 of the F1 Workshop

The effect of numerics on the simulation quality and convergence time.

Investigation  of the stresses and deflections in a wing when apply b ending and torsional load due to wind pressure

This project includes everything you need to get started with the homework assignment of our makers workshop

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

Simulation of Student formula car with own front-wing design

This project demonstrates the use of elastic support boundary condition in order to replace spring functionality in a pneumatic actuator. 

This project demonstrates the usage of rotating zones

This project contains everything you need to work on your homework assignement

This project contains everything you need to work on the second homework assignment of the drone workshop

Static stress analysis of a loaded L-shaped angled bracket

In this project basics of conduction, convection and radiation are demonstrated.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Tutorial project for post-processing of Thermal Comfort Parameters Locally in ParaView.

F1 workshop - Rear Wing Parametric Analysis

Convergence analysis for different situations: Notched plate, incompressibility, shear locking during bending

Homework for the Sport workshop : Session 2 
CFD analysis of a  bike tyre

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

In this project frequency and harmonic analysis of the Hayabusa engine were performed.

In this project, a dynamic nonlinear impact analysis of a human skull with and without helmet is performed.

This project performs a frictionless contact analysis between two spheres.

Project for Exercise 3 of FEA Professional training exam. To register for the training, please follow this link: https://www.simscale.com/professional-training/

This project shows the nonlinear static analysis of a bridge elastomer bearing pad.

Public Profile

DobesJ's profile