Set up your own cloud-native simulation in minutes.Start Simulating Now
167
0
1 Geometry
1 Mesh
1 Simulation setup
0 ResultsHere is a ROOM with a FAN on the right up against the wall. There are two other locations for the fan 1) Middle of the room 2) in the corner of the room. The fan produces 300CFM through a 200mm Pipe internal diameter. I need to see the degree of turbulence from the pipe in all three locations. Can somebody help me please...this is my first time using SimScale...thanks
1 Geometry 1 Mesh 1 Simulation setup 0 ResultsHere is a ROOM with a FAN on the right up against the wall. There are two other locations for the fan 1) Middle of the room 2) in the corner of the room. The fan produces 300CFM through a 200mm Pipe internal diameter. I need to see the degree of turbulence from the pipe in all three locations. Can somebody help me please...this is my first time using SimScale...thanks
DesignerPaul created this project
almost 5 years ago
DesignerPaul copied this project
almost 5 years ago
by ahmedhussain18ahmedhussain18
by tyrone321tyrone321
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
