SimScale simulation projects by Dave_Scott | Page 1

Dave_Scott's profile

How much does a large cylinder sag under its own weight

Check how internal pressure changes cylinder stiffness.

FEA of weld stress in a cylindrical joint welded at both ends

This project shows the bending of an Aluminium pipe through rolling process.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

1000lb applied to one beam, check bending and stress

Stress analysis of a shorter stopper - 5200lb

With 10mm weld to substrate, stopper is spaced 1mm from substrate (nominal), but fixed by weld. This study sees if the weld stress can be checked.

5200lb force on hollowed out torque arm. Check stress areas.

A torque arm with a hole cut-out, force is applied to one end and the shaft part is locked.

Calc stress in a 30mm thick tapered torque arm

Public Profile

Dave_Scott's profile