SimScale simulation projects by CS_ES | Page 1

CS_ES's profile

Comparing to
https://www.grc.nasa.gov/WWW/K-12/airplane/foil3.html

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for meshing of valve geometry with Snappy Hex Mesh

Trying to get heat transfer
I don't know what I'm doing - DO NOT COPY THIS PROJECT

Quick heat transfer in shell and thermocouple head

Amateur here, I don't recommend using this as a template

Checking heat transfer through thermocouple into shell

Public Profile

CS_ES's profile