SimScale simulation projects by CMcNealy | Page 1

CMcNealy's profile

This project will look into the heat generated by a battery when in use by an RC car.

Model of spray booth with conveyor down the center. Supply air from the celing into exhasut plenums lower down, at the opposite end of the booth.

An improved design, adding the supply intake to better represent the velocity coming into the booth.

This is a test for setting up a fan curve

A test to configure air flow out of a duct

Testing converting CAD files to make them water tight

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

CMcNealy's profile