SimScale simulation projects by Bjoern_Lau | Page 1

Bjoern_Lau's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

effect of number of propeller blades on the lift and drag/torc of the drone

This project contains everything you need to work on the second homework assignment of the drone workshop

This project includes everything you need to get started with the homework assignment of our makers workshop

This project contains everything you need to work on your homework assignement

Drone_Drop_Analysis
2 diffrent Arm dimensions
4 diffrent (+10o/o) Batteryweight

Design Build Fly - AIAA Workshop Session 1

Public Profile

Bjoern_Lau's profile