SimScale simulation projects by ApiratK | Page 1

ApiratK's profile

Demo of cooling of Raspberry Pi using the Immersed Boundary Method (IBM). 
IBM makes CAD cleanup and defeaturing obsolete. A CAD with detailed electronic features (pins, connectors, engravings, etc.) can be directly imported as is for simulation
In this demo a Raspberry Pi is overclocked and the heat transfer behaviour is compared for two cases where the fan is off and on. - Copy

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

ApiratK's profile