SimScale simulation projects by AndiM | Page 1

AndiM's profile

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

The effect of numerics on the simulation quality and convergence time.

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Handout  for Sports Aerodynamics Workshop: Session 3

Effect of the number of propeller blades on the lift of the Drone.

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Homework for the Sport workshop : Session 2 
CFD analysis of a  bike tyre

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

How changing the weight of the battery and the motor affect during an accidental drop.

Heat Transfer Analysis of a Cooling Plate

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

Public Profile

AndiM's profile