SimScale simulation projects by Amj | Page 1

Amj's profile

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Tutorial for meshing of valve geometry with Snappy Hex Mesh

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

This project include a simulation of the external aerodynamics of 2017 F1 race car.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Porous Media Test3, new set of parameters.

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This project include a simulation of the external aerodynamics of 2017 F1 race car. Copied from Milad_Mafi

Public Profile

Amj's profile