SimScale simulation projects by AkshayMalde | Page 1

AkshayMalde's profile

Attempting box HexMesh with barrel geometry

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

imported geometry from Onshape CFD trail 1

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project provides a heat transfer analysis of a duct with a heated element running through it under two airflow regimes. In the first analysis, air flows in a laminar fashion through the duct and in the second, the air flows in a turbulent fashion. Each end of the heated element has a temperature of 400 K.

Tutorial project for heat transfer in an engine piston

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for  Incompressible, turbulent airflow around a frontwing

convective airflow through a heated airduct

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Meshing bullet with hex-dominant box mesh

Public Profile

AkshayMalde's profile