SimScale simulation projects by Akoi | Page 1

Akoi's profile

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will complete a laminar pipe flow analysis

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project simulates Couette flow - flow in annulus fixed-rotating cylinder pair.

Simulation of fluid flow through impeller

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Public Profile

Akoi's profile