Aiaa - DBF Workshop -1

pressure - PostProcessorScreenshot
pressure - PostProcessorScreenshot
PostProcessorScreenshot
2D
wallShear - 3 deg - PostProcessorScreenshot
PostProcessorScreenshot
2D
wall-shear - PostProcessorScreenshot
PostProcessorScreenshot
2D
stream lines - PostProcessorScreenshot
PostProcessorScreenshot
2D
u-contour - PostProcessorScreenshot
PostProcessorScreenshot
2D
Streamtracer - 3deg - PostProcessorScreenshot
PostProcessorScreenshot
2D
Pressure - 3deg - PostProcessorScreenshot
PostProcessorScreenshot
2D
H-Config - Geometry
Geometry
3D
views 381
shares 1
Ahtisham
Created

over 7 years ago

Last modified

over 7 years ago

Statistics
geometries 1 Geometry
meshes 1 Mesh
simulations 2 Simulation setups
runs 2 Results

About this project

In this tutorial, you will be doing a full fledged flow simulation of the aerodynamics of a model airplane. The focus of this simulation is to investigate the performance of the airplane - in particular the wing - by looking at drag and lift forces at different angles of attack. For your homework, your task is to investigate the behavior of drag and lift for different angles of attack (which will be simulated without changing the geometry) and determine the best setup. We will work with an angle of 3 degrees and 20 degrees for a plane travelling at 20 m/s.

Start the Conversation

Default avatar

Log in to comment.

Not yet a SimScale user? Sign up.

Aiaa - DBF Workshop -1 by Ahtisham | SimScale