SimScale simulation projects by Adhitya1996 | Page 1

Adhitya1996's profile

The purpose of an upright assembly is to provide a physical mounting and links from the suspension arms to the hub and wheel assembly, in addition to carrying brake components. It is a load-bearing member of the suspension system and is constantly moving with the motion of the wheel.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

The effect of numerics on the simulation quality and convergence time.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

To study the heat transfer taking place in an engine

Tutorial project for heat transfer in an engine piston

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Adhitya1996's profile