SimScale simulation projects by 35cdb9fe835248 | Page 1

35cdb9fe835248's profile

Simulates conflict of two fans taking air to each other

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This is a fan duct air flow test for E3D V6 hotend conversion for JGAurora A5, with small 30 mm fans to reduce weight and need to use voltage convertors.

Simulates thermal conductivity with a low conductivity material used as a block

Test of hotend temperature radiation into surroundings

Public Profile

35cdb9fe835248's profile