SimScale simulation projects by 2e47f01f41964f | Page 1

2e47f01f41964f's profile

Francis Turbine Turbulent flow analysis - Copy

This validation case belongs to fluid dynamics. The aim of this validation case is to validate the conjugate heat transfer(CHT) v2.0 analysis implemented in SimScale.
The simulation results of SimScale were compared to the results presented in the study titled  Unshrouded Plate Fin Heat Sinks for Electronics Cooling: Validation of a Comprehensive Thermal Model and Cost Optimization in Semi-Active Configuration written by L. Ventola, G. Curcuruto, et. al. - Copy

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime. - Copy

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used. - Copy

This project simulates a Centrifugal Pump with a rotating mesh using Arbitrary Mesh Interface - AMI - approach. - Copy

This project simulates transient wake formation behind a boat. - Copy

Public Profile

2e47f01f41964f's profile