SimScale simulation projects by 180101161012 | Page 1

180101161012's profile

Stress analysis is a very important field in product optimisation and in conjunction with Finite element methods, solving complex
structures is relatively quicker. In this study stress analysis of a Bicycle frame is carried out using ANSYS Workbench 14.5 using
various boundary conditions and compared it with theoretical results. All the stresses were found well below the yield stress of
the material used and hence are in the safer zone.

An aircraft is a complex structure, but a very efficient manmade flying machine. Aircraft are generally built-up from the
basic components of wings, fuselage, tail units and control
surfaces. The load-bearing members of these main sections,
those subjected to major forces, are called the airframe.
Brackets are connector type elements widely used as structural
supports to carry hydraulic and electrical lines used in engines,
wings and landing gear links. Failure of brackets may lead to
the catastrophic failure of the whole structure. Finite element
analysis studies and experimental data help the designer to
safeguard the structure from catastrophic failure. I-Bracket
and Z-Bracket are considered for our project to analyze stress
and natural frequencies that may cause resonant response
under right excitation forces.

To find out stress and deflection of a cantilever beam

Public Profile

180101161012's profile