SimScale simulation projects by 1042195119 | Page 1

1042195119's profile

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Conjugate heat transfer simulation tutorial.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Thermal Analysis of a Differential Casing

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

1042195119's profile