SimScale simulation projects by ssoder | Page 1

ssoder's profile

Tutorial for In-compressible Turbulent flow through a cyclone seperator

A personal study on the effects of piping below recommended distance before and after non-return valve.

Initial brush of CFD analysis of globe valve

Tutorial for meshing of valve geometry with Snappy Hex Mesh

This is an attempt to recreate a classic, well-known problem in Fluid Mechanics, the turbulent boundary layer created by steady-state, laminar flow over a flat plate.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

ssoder's profile