SimScale simulation projects by andydroy89 | Page 1

andydroy89's profile

To study the falling ball experiment on blood

How do Birds and Insects Fly How do Birds and Insects FlyHow do Birds and Insects FlyHow do Birds and Insects Flyto How do Birds and Insects Fly

Retardation of flow within the boundary layer causes a reduction in the
momentum flux too.

Study of Lift Force on the Circular Cylinder

Lift Force on the Circular Cylinder Near Ground

In the ANSYS Workbench Project Schematic, double-click the Setup cell in the elbow fluid flow analysis
system.You can also right-click the Setup cell to display the context menu where you can select the Edit...
option.
When ANSYS Fluent is first started, the Fluent Launcher is displayed, enabling you to view and/or
set certain ANSYS Fluent start-up options

The problem to be considered is shown schematically in Figure 1.1: Problem Specification (p. 3). A
cold fluid at 293.15 K flows into the pipe through a large inlet and mixes with a warmer fluid at 313.15 K
that enters through a smaller inlet located at the elbow. The mixing elbow configuration is encountered
in piping systems in power plants and process industries. It is often important to predict the flow field
and temperature field in the area of the mixing region in order to properly design the junction.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

andydroy89's profile