Explore agentic engineering workflow on SimScaleExperience Engineering AI
Cantilever beam
287
1
Statistics
1 Geometry
2 Meshes
2 Simulation setups
2 Results
1 Geometry 2 Meshes 2 Simulation setups 2 ResultsAbout this project
Load on a cantilever beam. I build a model of a cantilever beam by Onshape with 20m long, 2m height and 1m wild. The material is steel. The boundary conditions: one end is fixed and the other end is loaded a 2000000N force in the y-direction. I made two meshes, one is fine and the other is coarse.
