SimScale simulation projects by tsite | Page 1

tsite's profile

Tutorial project for linear static analysis of a crane - Copy

Simulation to identify pressure drop and flow distribution across channels. Copied from @rulmismo

This tutorial shows how to analyze the Heat transfer in a heat sink.

The purpose of this test case is to validate the mean surface pressure on a building with balconies, using the Lattice Boltzmann model for three wind directions.

The purpose of this simulation is the examining of the behavior of air flow through a modern urban landscape. CFD wind engineering, constitutes a valuable source of input for urban developers, architectural designers and environmental planners to promote natural ventilation, a good measure for reducing energy use in buildings and providing better outdoor air quality.

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

the 10th(i think) iteration of the package plane

Displacement controlled compression test on novel sandwich structure. Geometry, Contact and material non linearity.

Tutorial for the flow of fluid through a pipe junction

Simulating the effects of pressure and velocity on a spherical helical turbine.

Thermal comfort simulation on condominium unit

Calculation of the age of air (the average time for air to travel from a specified inlet to any point of an enclosed geometry) in a reservoir.

Investigation of exhaust gas flow through a plate for pressure control.

The aim of this test case is to validate the following parameters of incompressible steady-state laminar fluid flow through a pipe.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This tutorial shows how the hex-dominant parametric meshing algorithm can be used for a front wing.

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

This project simulates compressible turbulent flow through a de Laval nozzle.

This project shows the bending of an Aluminium pipe through rolling process.

Public Profile

tsite's profile