Set up your own cloud-native simulation in minutes.Start Simulating Now
666
0
1 Geometry
1 Mesh
2 Simulation setups
3 ResultsThe purpose of this project is to determine whether the stresses developing in the lift mechanism remain below yield strength. A 2:1 factor of safety is desired. If stress is too high, then the mechanism will need redesign.
by mwavinyamwavinya
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
thomazin created this project
over 6 years ago
1 Geometry 1 Mesh 2 Simulation setups 3 ResultsThe purpose of this project is to determine whether the stresses developing in the lift mechanism remain below yield strength. A 2:1 factor of safety is desired. If stress is too high, then the mechanism will need redesign.
