Looking for vehicle design simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

In this project we will analise the CD, Cl, CMz and Center of Pressure location.

Designing some aerodynamic parts for my Mitsubishi Lancer Evolution 5 to boost grip performance in Time Attack. CFD

CFD Analysis of Tesla Cybertruck. 
Cd (Coefficient of drag) 0.387

This projects validates the incompressible flow simulation results of SimScale around the Ahmed body.

In this project static structural FEA of front upright of Formula Student Vehicle is carried out under loading conditions. 800 newtons of force is applied at the both upper and lower control arm and 5000 newtons of force is applied as brake force and the behavior of upright is observed for the further considerations and use in vehicle.

Following the new 2021 F1 rules, this simulation showcases why is it really important to focus on diminishing the amount of dirty air that the following car is receiving when it comes to wheel-to-wheel battles.

Kingpin holder is an Vital Component in car's steering system, Our goal is to minimize the weight for a given known stress.  I am going to use Static Structural Finite Element Analysis to calculate the deformation and stresses.

It's an old prototype of a design idea for a velomobil.

The undertray is known to be the most aerodynamically efficient downforce generating device. Theoretically, almost 50-60 percentage of the downforce generated by the aerodynamic package of an F1 car is generated by the undertray. Moreover, the undertray produces a very minimal amount of drag force owing to its reduced frontal area hence the lift(here downforce) to drag ratio is very high. Therefore, optimizing the undertray design is of great significance to the overall downforce generated by a car.

This project  involves meshing externally an F1 type Front Wing, and then simulating its' operation when facing a horizontal airflow of 20 m/s. Nowadays it is very common to witness F1 type cars using this type of leaf-like wings, called cascades, acting to generate vortices behind them that spiral upwards and outwards in channels controlled to the millimeter and shaped around the front wheels, towards the underfloor, through and around radiator inlets and between suspension components, and lately , it has been introduced by some Formula Student teams as well.  For this case a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification. A steady state incompressible flow simulation is executed to visualize the air flow around the bodywork and wings of the part, as well as the pressure distribution, the outwash effect of the cascade and endplate, as well as the vortices of the footplate.

Set a baseline for a generic tanker shape then investigate methods of reducing drag

Aerodynamic simulation of the flow over a truck

Simulation of exhaust gases propagation behind the moving truck.