Looking for cfd simulation simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 10

Golf ball with 200 dimples drag coefficient analysis

CFD simulation for model car
hope to get better understanding of using simscale
F1 in schools car cfd simulation for a portfolio

Como proyecto de final de grado; hacer un estudio aerodinámico de un Audi R8 y analizar los resultados

analysing about windflow around the residentail house

"On a flat 3D plane, there are two rectangular buildings with square top and bottom faces, each measuring 100 meters in width and depth, and 500 meters in height. The buildings are positioned 50 meters apart. A wind is blowing toward the buildings from a point slightly offset in front of the center of their height."



este proyecto se hace para verificar el analisis de una tuberia como proyecto para la asignatura de mecanica de fluidos 

Doing Vibration/ modal analysis on the airplane as an assignment

This project investigates natural convection heat transfer within a two-dimensional square cavity, driven by temperature differences across the vertical walls.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

water tant stand that is 5m high that must support 10 000 liters of water. each member of the stand must not exceed 125MPa of yield strength. The material used must be steel with density of 7900kg/m^3. it is recommended that we design a 3D structure using less members but statically determined. calculate all the forces within the members and test for buckling and FEA Analysis is required 

Define forces, thrust, torque, moment of drone