Looking for cfd modeling simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

This simulation aims to study the velocity and the tubulence inside a tubocharger

This simulation aims to study the aerodynamic of the tesla cybertruck.

In this simulation project, we delved into the dynamics of a straightforward yet crucial piece of equipment: a simple straight-tube heat exchanger. With no fins or obstructions, the goal was to ensure optimal heat transfer between two fluids a puzzle that required both technical expertise and a dash of creativity.

Peristaltic transport of newtonian fluid in the process of endoscopy

This is a cfd simulation inside a maniflod exhaust

Testing air flow in an office environment

Heat Transfer and fluid flow in a room are visualized using this platform.

The Lockheed Martin RQ-170 Sentinel is an American unmanned aerial vehicle (UAV) developed by Lockheed Martin and operated by the United States Air Force for the Central Intelligence Agency (CIA). It's curious to note that its aerodynamic profile resembles that of a peregrine falcon. There's not much information about this aircraft, but it's estimated that it can reach a speed of 950 km/h and 1400 km of autonomy. Which's the secret to reach a high velocity is the project goal. The drag coefficient is a good reason for this. In this project, we can calculate the drag coefficient using an Incompressible Flow solver.

That kind of profile is preferred for HVAT (instead of NACA0018). Let's see how it behaves

Final Project at Bogazici University Mechanical Engineering Department

This project is used to simulate in the lab.

To Fix the dead zones and improve the mixing efficiency

Goal: decrease CO concentration to acceptable levels according to local regulations. 
Simulation Type: CFD - Transient simulation.

CFD Simulation to analyze the pressure coefficient on the façade windows.

Large Eddy Simulation for Wind flow around Olympia turm in Munich

CFD analysis preformed on stealth combat fighter

The rear wing plays a vital role to maintain the friction on the ground. The simulation analysis a flow over a rear wing developed to study the airflow patterns. An incompressible  external flow analysis is carried out to determine its flow patterns.

Aim to evaluate the result of duoble air-inlet and one gas inlet

The aim of the project was to implement a porous media option and try to understand the basic concept behind through CFD setup. for this case, incompressible flow simulation type was used. In this case, the pressure drop across the two was calculated and done some iteration.

Analysis of the hydraulic behavior of the system

Eveluation of Drag and lift Coefficients of UnderTray Design

The goal of this project is to simulate the simplified version of the cooling system of the HP Workstation Notebook.
This is a Conjugate Heat Transfer (CHT) problem. Incompressible turbulent flow was assigned for the air flow. Two cooling scenarios are going to be investigated
1- Current cooling system 
2- External cooling fan assisted system

cfd modeling | SimScale Project Library | Page 1