SimScale simulation projects by sanjaykulkarni | Page 1

sanjaykulkarni's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Attenuator is a device fitted in front of the car to avoid driver from collision without bulkhead failure

Attenuator is a device fitted in front of a car to avoid the driver from collission without bulkhead failure

This project shows the bending of an Aluminium pipe through rolling process.

The objective of this project to determine the stress and displacement induced in the crane
static analysis

Tutorial project for linear static analysis of a crane

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Public Profile

sanjaykulkarni's profile